Avamar 5.0 Exchange Client User Guide.pdf - EMC Community ...
Avamar 5.0 Exchange Client User Guide.pdf - EMC Community ... Avamar 5.0 Exchange Client User Guide.pdf - EMC Community ...
Windows Exchange Database Plugin OptionsAPPENDIX A — PLUG-IN OPTIONSRestore OptionsFIELD/OPTIONPerformDatabaseRecovery afterrestore makingExchangeconsistentWait forDatabaseRecovery toCompleteMount thedatabase(s)aftersuccessfulrestoreKeep logs afterRestoreRestore logspathAdjust for gapswhen existinglog files arenot contiguousMove logs pathRecoveryStorage GroupNameRedirectedstorage grouppathDESCRIPTIONPerforms soft recovery (performs a consistency checkand prepares to put the database online) after databaseis restored. This is the default setting.If Perform Database Recovery after restore makingExchange consistent is selected, specifies whether towait for the recovery process to complete or completethe restore session asynchronously with the recoveryprocess. Dependent on the previous option. This is thedefault setting.If selected, databases will be mounted following asuccessful restore. This is not the default setting.If selected, restore log files are written to the locationspecified in the Restore logs path field.Specifies location for restore log files. Specify thisalternative location C:\TMP if drive is low on disk space.If selected, restore operation will include a check forcontiguous log files error and will correct the error. This isthe default setting.Specifies location for keeping old restore log files.Existing log files are moved to this location prior to therestore operation. This prevents log file conflicts duringrestore.Specifies Recovery Storage Group that will be createdduring the restore operation. Default name is RSG.Specifies location for redirect restores that include aRecovery Storage Group. The Recovery Storage Groupname specified in the Recovery Storage Group Namefield is created under this location.AVAMAR 5.0 • AVAMAR EXCHANGE CLIENT USER GUIDE 74
Windows Exchange Database Plugin OptionsAPPENDIX A — PLUG-IN OPTIONSFIELD/OPTIONServer NameAnnotation(MicrosoftInformationStore)This field can normally be left blank because theExchange server name is automatically stored when thetarget client is browsed during restore operations.However, this field can be used to type another serverhostname when performing directed restores to anothernetwork host.This field names the portion of (Extensible StorageEngine (ESE) backup to perform. Choices are:MicrosoftInformationStoreDESCRIPTIONThis is the default setting.ADVANCED OPTIONSStorage GroupNameMicrosoft SiteReplicationServiceMicrosoft KeyManagementServiceSite replication service used for mixedExchange 5.5 and 2000/2003environments.This is the local activation service thatprovides Windows product activation inplace of product activation over theInternet through Microsoft’s servers.This field can normally be left blank because theExchange storage group name is automatically storedwhen the target client is browsed during restoreoperations.Local BackupFile NamePipe input/output to avtarEnabledebuggingmessagesIf Pipe input/output to avtar is cleared, this field definesthe filename used to send/receive data.This can be used to restore the exchstream file in onestep to a local file, then perform a Exchange restoreusing that file.If selected, backups and restores are performed directlyby the Avamar backup process (avtar).If cleared, an intermediate local backup file can be used.If selected, maximum information is written to log files.IMPORTANT: If selected, very large log files arecreated.AVAMAR 5.0 • AVAMAR EXCHANGE CLIENT USER GUIDE 75
- Page 24 and 25: Configuring an Exchange Server 2007
- Page 26 and 27: Configuring an Exchange Server 2007
- Page 28 and 29: Configuring an Exchange Server 2007
- Page 30 and 31: Configuring an Exchange Server 2003
- Page 32 and 33: Configuring an Exchange Server 2003
- Page 34 and 35: Configuring the Avamar Cluster Clie
- Page 36 and 37: Configuring the Avamar Cluster Clie
- Page 38 and 39: Uninstalling and Upgrading the Avam
- Page 40 and 41: Uninstalling an Older Version of Cl
- Page 42 and 43: Exchange Backup and RecoveryUSING T
- Page 44 and 45: Backing Up an Entire Exchange Datab
- Page 46 and 47: Backing Up an Entire Exchange Datab
- Page 48 and 49: Backing Up One or More Message Fold
- Page 50 and 51: Backing Up One or More Message Fold
- Page 52 and 53: Backing Up One or More Message Fold
- Page 54 and 55: Backing Up One or More Message Fold
- Page 56 and 57: Backing Up One or More Message Fold
- Page 58 and 59: Backing Up One or More Message Fold
- Page 60 and 61: Recovering an Entire Exchange Datab
- Page 62 and 63: Recovering an Entire Exchange Datab
- Page 64 and 65: Restoring to a RSG with the Windows
- Page 66 and 67: Recovering in an Exchange Server 20
- Page 68 and 69: Restoring a Database to a RSG and R
- Page 70 and 71: APPENDIX A — PLUG-IN OPTIONSImpor
- Page 72 and 73: Windows Exchange Database Plugin Op
- Page 76 and 77: Windows Exchange Message Plugin Opt
- Page 78 and 79: APPENDIX B — MANUALLY CREATING TH
- Page 80 and 81: Manually Creating the AvamarBackupU
- Page 82 and 83: Manually Creating the AvamarBackupU
- Page 84 and 85: Manually Creating the AvamarBackupU
- Page 86 and 87: Manually Creating the AvamarBackupU
- Page 88 and 89: Manually Creating the AvamarBackupU
- Page 90: Manually Creating the AvamarBackupU
Windows <strong>Exchange</strong> Database Plugin OptionsAPPENDIX A — PLUG-IN OPTIONSFIELD/OPTIONServer NameAnnotation(MicrosoftInformationStore)This field can normally be left blank because the<strong>Exchange</strong> server name is automatically stored when thetarget client is browsed during restore operations.However, this field can be used to type another serverhostname when performing directed restores to anothernetwork host.This field names the portion of (Extensible StorageEngine (ESE) backup to perform. Choices are:MicrosoftInformationStoreDESCRIPTIONThis is the default setting.ADVANCED OPTIONSStorage GroupNameMicrosoft SiteReplicationServiceMicrosoft KeyManagementServiceSite replication service used for mixed<strong>Exchange</strong> 5.5 and 2000/2003environments.This is the local activation service thatprovides Windows product activation inplace of product activation over theInternet through Microsoft’s servers.This field can normally be left blank because the<strong>Exchange</strong> storage group name is automatically storedwhen the target client is browsed during restoreoperations.Local BackupFile NamePipe input/output to avtarEnabledebuggingmessagesIf Pipe input/output to avtar is cleared, this field definesthe filename used to send/receive data.This can be used to restore the exchstream file in onestep to a local file, then perform a <strong>Exchange</strong> restoreusing that file.If selected, backups and restores are performed directlyby the <strong>Avamar</strong> backup process (avtar).If cleared, an intermediate local backup file can be used.If selected, maximum information is written to log files.IMPORTANT: If selected, very large log files arecreated.AVAMAR <strong>5.0</strong> • AVAMAR EXCHANGE CLIENT USER GUIDE 75
Change language