Avamar 5.0 Exchange Client User Guide.pdf - EMC Community ...

Installing the Avamar Exchange ClientInstalling the Avamar Exchange ClientINSTALLING/UNINSTALLING AVAMAR EXCHANGE CLIENTIMPORTANT: For Exchange clusters, you must install theAvamar Windows Client and the Avamar Exchange Client onall nodes of the cluster. Also, they must be installed to thesame directories on all cluster nodes. For example, if youinstall the Avamar client to C:\AVS1 on the first node, youmust install the Avamar client to the same directory C:\AVS1on all other nodes in the cluster.1. Log into the client computer or workstation.2. Point your web browser at the Avamar server by typing the following URL:http://AVAMARSERVERWhere AVAMARSERVER is your actual Avamar system network hostname(as defined in DNS) or IP address.You will be automatically redirected to the Avamar secure web server.Depending on your browser security settings, a security alert dialog boxmight appear.3. If a security alert dialog box appears, click Yes or OK to allow redirectionto the Avamar secure web server.The Secure Log On page appears.4. Page down until the Downloads and Documents hyperlink is visible.5. Click Downloads and Documents.The Downloads and Documentation page appears.6. Click the Exchange client install package that corresponds to your versionof Exchange:• Exchange Server 2003 (32 bit): AvamarExchange2003-windowsx86-VERSION.msi.• Exchange Server 2007 (64 bit): AvamarExchange2007-windowsx86_64-VERSION.msi.Your browser will prompt you to either open the file “in-place” (on theserver) or save it to your local computer or workstation. Either method willwork. However, if you save the file to your local computer or workstation,you must open (double-click) that installation file to continue with thisprocedure.7. Open the installation in place (on the server).The InstallShield Wizard appears.8. Follow the on-screen instructions.9. Click Finish to complete the installation procedure.AVAMAR 5.0 • AVAMAR EXCHANGE CLIENT USER GUIDE 22