Proline Promass 83E/F/O Modbus RS485 Operating Instructions

Proline Promass 83 Modbus RS485äTroubleshootingModbus No. Device status message(local display)Cause Remedy (spare part ä 101)Register:6859Data type:IntegerRegister:6821Data type:String (18 byte)No. # 8xx Other error messages with software options (Coriolis flowmeter)117 M. FL. DEV. LIMIT 800 S: M. FL. DEV. LIMIT!: # 800Advanced diagnostics: The mass flow is outside the limitvalue, set in the correspondingdiagnosis functions.118 DENS. DEV. LIM. 801 S: DENS. DEV. LIMIT!: # 801Advanced diagnostics: The density is outside the limitvalue, set in the correspondingdiagnosis functions.119 REF. D. DEV. LIM. 802 S: REF. D. DEV. LIM.!: # 802Advanced diagnostics:The reference density is outside thelimit value, set in the correspondingdiagnosis functions.120 TEMP. DEV.LIMIT803 S: TEMP. DEV. LIMIT!: # 803Advanced diagnostics: Thetemperature is outside the limitvalue, set in the correspondingdiagnosis functions.121 T. DAMP. DEV.LIM804 S: T. DAMP. DEV. LIM!: # 804Advanced diagnostics: The tubedamping is outside the limit value,set in the corresponding diagnosisfunctions.122 EL. DYN. SENS.LIM.805 S: E. D. SEN. DEV. LI!: # 805Advanced diagnostics: The electrodynamic sensor isoutside the limit value, set in thecorresponding diagnosis functions.123 F. FLUCT. DEV.LIM.806 S: F. FLUCT. DEV. LIM!: # 806Advanced Diagnostics:The fluctuation of the operatingfrequency is outside the limit value,set in the corresponding diagnosisfunctions.124 TD FLUCT. DEV.LIM.807 S: TD FLUCT. DEV. LIM!: # 807Advanced Diagnostics:The fluctuation of the tube dampingis outside the limit value, set in thecorresponding diagnosis functions.Issue/Rev. 0.2 (12/12) MN0M030 • Page 95