Proline Promass 83E/F/O Modbus RS485 Operating Instructions

Proline Promass 83 Modbus RS485CommissioningRecommended settingsQuick Setup "Batching"HOME position F MEASURED VARIABLE (A)MEASURED VARIABLE O QUICK SETUP (B)QUICK SETUP N QUICK SETUP BATCHING (1005)Function No. Function name Setting to be selected ( P )(to next function with F )1005 QUICK SETUP BATCHING YESAfter F is pressed by way of confirmation, theQuick Setup menu calls up all the subsequentfunctions in succession.Æ! Note!Functions with a gray background are configured automatically (by the measuring system itself)6400 ASSIGN LOW FLOW CUTOFF MASS FLOW6402 ON-VALUE LOW FLOW CUT OFF see table on following page6403 OFF-VALUE LOW FLOW CUTOFF 50%6603 FLOW DAMPING 0 seconds6404 PRESSURE SHOCK SUPPRESSION 0 seconds7200 BATCH SELECTOR BATCH #17201 BATCH NAME BATCH #17202 ASSIGN BATCH VARIABLE MASS7203 BATCH QUANTITY 07204 FIX COMPENSATION QUANTITY 07205 CORRECTION MODE OFF7208 BATCH STAGES 17209 INPUT FORMAT VALUE INPUT4700 ASSIGN RELAY BATCHING VALVE 14780 TERMINAL NUMBER Output (display only)7220 OPEN VALVE 1 0% or 0 [unit]7240 MAXIMUM BATCHING TIME 0 seconds (= switched off)7241 MINIMUM BATCHING QUANTITY 07242 MAXIMUM BATCHING QUANTITY 02200 ASSIGN (main line) BATCH NAME2220 ASSIGN (Multiplex main line) OFF2400 ASSIGN (additional line) BATCH DOWNWARDS2420 ASSIGN (Multiplex additional line) OFF2600 ASSIGN (information line) BATCHING KEYS2620 ASSIGN (Multiplex info line) OFFBack to the HOME position: Press and hold down Esc key X for longer than three seconds or Repeatedly press and release Esc key X Exit the function matrix step by stepÆIssue/Rev. 0.2 (12/12) MN0M030 • Page 67