Proline Promass 83E/F/O Modbus RS485 Operating Instructions

More documents

Recommendations

Info

OperationProline Promass 83 Modbus RS4852. Access to data via ModbusBy specifying the register start address 5051 and the number of registers, the Modbus master canread out the measured values with just one request telegram.Data areaAccess via Modbus registeraddressMeasured values Data type Access5051 Mass flow = 4567.67 Float Read5053 Temperature = 26.5 Float Read5055 Totalizer 1 = 56345.6 Float Read5057 Actual system condition = 1 (system ok) Integer ReadModbus RS485SlaveMasterDataRegister Value2007 4567.672017 26.52610 56345.66859 1Autoscan BufferValueData4567.6726.556345.61Register5051505350555057Scan ListNo.1234ScanRegister2007201726106859DataValue4567.6726.556345.61Fig. 35:a0004407-enWith just one request telegram, the Modbus master reads out the measured values via the auto-scan buffer ofthe measuring device.Page 52 • MN0M030Issue/Rev. 0.2 (12/12)
Proline Promass 83 Modbus RS485Operation5.6 Operating options5.6.1 FieldCareFieldCare is Endress+Hauser’s FDT-based plant asset management tool and allows the configurationand diagnosis of intelligent field devices. By using status information, you also have a simple buteffective tool for monitoring devices. The Proline flowmeters are accessed via a service interface orvia the service interface FXA193.5.6.2 Current device description filesThe following table illustrates the suitable device description file for the operating tool in questionand then indicates where these can be obtained.Operation via Service-Protokoll:Valid for device software: 3.06.XXSoftware release: 06.2010 DEVICE SOFTWARE function (8100)Operating program/Device driver:How to acquire:FieldCare/DTM• www.endress.com Download• CD-ROM (Endress+Hauser order number: 56004088)• DVD (Endress+Hauser order number: 70100690)Tester/simulator:FieldcheckSources for obtaining device descriptions:• Update by means of FieldCare with the Flow Device FXA 193/291 DTMin the Fieldflash Module!Note!The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used inconjunction with the "FieldCare" software package, test results can be imported into a database,printed and used for official certification. Contact your representative for moreinformation.Issue/Rev. 0.2 (12/12) MN0M030 • Page 53
Page 1 and 2: Issue/Rev. 0.2 (12/12)Coriolis Mass
Page 3 and 4: Proline Promass 83 Modbus RS485Tabl
Page 5 and 6: Proline Promass 83 Modbus RS485Safe
Page 7 and 8: Proline Promass 83 Modbus RS485Iden
Page 9 and 10: Proline Promass 83 Modbus RS485Iden
Page 12 and 13: InstallationProline Promass 83 Modb
Page 26 and 27: WiringProline Promass 83 Modbus RS4
Page 34 and 35: OperationProline Promass 83 Modbus
Page 60 and 61: EscCommissioningProline Promass 83
Page 62 and 63: CommissioningProline Promass 83 Mod
Page 64 and 65: CommissioningRecommended settings Q
Page 86 and 87: MaintenanceProline Promass 83 Modbu
Page 88 and 89: AccessoriesProline Promass 83 Modbu
Page 90 and 91: TroubleshootingProline Promass 83 M
Page 92 and 93: TroubleshootingModbus No. Device st
Page 94 and 95: TroubleshootingäProline Promass 83
Page 102 and 103:
TroubleshootingProline Promass 83 M
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Technical dataProline Promass 83 Mo
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Technical dataPerformance character
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Technical dataLimiting flowPressure
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Proline Promass 83 Modbus RS485Inde
Page 156 and 157:
Proline Promass 83 Modbus RS485Rela
Page 158:
The specifications contained herein
show all

Proline Promass 83E/F/O Modbus RS485 Operating Instructions

Create successful ePaper yourself

Delete template?

Save as template?