Proline Promass 83E/F/O Modbus RS485 Operating Instructions

More documents

Recommendations

Info

OperationProline Promass 83 Modbus RS4855.2 Local display5.2.1 Display and operating elementsThe local display enables you to read all important parameters directly at the measuring point andconfigure the device using the "Quick Setup" or the function matrix.The display consists of four lines; this is where measured values and/or status variables (directionof flow, empty pipe, bar graph, etc.) are displayed. You can change the assignment of display linesto different variables to suit your needs and preferences ( see the "Description of DeviceFunctions" manual).Fig. 25: Display and operating elements1 Liquid crystal displayThe backlit, four-line liquid crystal display shows measured values, dialog texts, fault messages and noticemessages. The display as it appears when normal measuring is in progress is known as the HOME position(operating mode).2 Optical sensors for "Touch Control"3 Plus/minus keys– HOME position Direct access to totalizer values and actual values of inputs/outputs– Enter numerical values, select parameters– Select different blocks, groups and function groups within the function matrixPress the O/S keys ( X) simultaneously to trigger the following functions:– Exit the function matrix step by step HOME position– Press and hold down O/S keys for longer than 3 seconds Return directly to HOME position– Cancel data entry4 Enter key– HOME position Entry into the function matrix– Save the numerical values you input or settings you changePage 34 • MN0M030Issue/Rev. 0.2 (12/12)
Proline Promass 83 Modbus RS485Operation5.2.2 Display (operation mode)The display area consists of three lines in all; this is where measured values are displayed, and/orstatus variables (direction of flow, bar graph, etc.). You can change the assignment of display linesto different variables to suit your needs and preferences ( see the "Description of DeviceFunctions" manual).Multiplex mode:A maximum of two different display variables can be assigned to each line. Variables multiplexed inthis way alternate every 10 seconds on the display.Error messages:Display and presentation of system/process errors ä 41Fig. 26: Typical display for normal operating mode (HOME position)1 Main line: shows the main measured values2 Information line: shows additional measured variables and status variables3 Information line: shows additional information on the measured variables and status variables, e.g. bar graphdisplay4 "Info icons" field: icons representing additional information on the measured values are shown in this fieldä 36.5 "Measured values" field: the current measured values appear in this field6 "Unit of measure" field: the units of measure and time defined for the current measured values appear in this field5.2.3 Additional display functionsDepending on the order option, the local display has different display functions (F–CHIP ä 85).Device without batching software:From HOME position, use the P keys to open an "Info Menu" containing the following information:• Totalizer (including overflow)• Actual values or states of the configured inputs/outputs• Device TAG number (user-definable)P Scan of individual values within the Info MenuX (Esc key) Return to HOME positionDevice with batching software:On measuring instruments with installed batching software (F-Chip*) and a suitably configureddisplay line, you can carry out filling processes directly using the local display. For a detaileddescription ä 38.Issue/Rev. 0.2 (12/12) MN0M030 • Page 35
Page 1 and 2: Issue/Rev. 0.2 (12/12)Coriolis Mass
Page 3 and 4: Proline Promass 83 Modbus RS485Tabl
Page 5 and 6: Proline Promass 83 Modbus RS485Safe
Page 7 and 8: Proline Promass 83 Modbus RS485Iden
Page 9 and 10: Proline Promass 83 Modbus RS485Iden
Page 12 and 13: InstallationProline Promass 83 Modb
Page 26 and 27: WiringProline Promass 83 Modbus RS4
Page 36 and 37: OperationProline Promass 83 Modbus
Page 60 and 61: EscCommissioningProline Promass 83
Page 62 and 63: CommissioningProline Promass 83 Mod
Page 64 and 65: CommissioningRecommended settings Q
Page 84 and 85:
CommissioningProline Promass 83 Mod
Page 86 and 87:
MaintenanceProline Promass 83 Modbu
Page 88 and 89:
AccessoriesProline Promass 83 Modbu
Page 90 and 91:
TroubleshootingProline Promass 83 M
Page 92 and 93:
TroubleshootingModbus No. Device st
Page 94 and 95:
TroubleshootingäProline Promass 83
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Technical dataProline Promass 83 Mo
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Technical dataPerformance character
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Technical dataLimiting flowPressure
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Proline Promass 83 Modbus RS485Inde
Page 156 and 157:
Proline Promass 83 Modbus RS485Rela
Page 158:
The specifications contained herein
show all

Proline Promass 83E/F/O Modbus RS485 Operating Instructions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?