Proline Promass 83E/F/O Modbus RS485 Operating Instructions

Proline Promass 83 Modbus RS485Technical dataPromass P:Stainless steel 1.4435/316LPromass O:• Stainless steel 25Cr Duplex EN 1.4410/UNS S32750 (superduplex)Promass X:• Stainless steel 1.4404/316/316L; manifold: 1.4404/316/316LSeals:Promass F, E, H, I, S, P, O, X:Welded process connections without internal sealsPromass A:Welded process connections without internal seals.Only for mounting sets with threaded connections: Viton, EPDM, Silikon, KalrezMaterial load diagramThe material load diagrams (pressure-temperature diagrams) for the process connections areprovided in the separate "Technical Information" document on the device in question. This can bedownloaded as a PDF file from www.endress.com. A list of the "Technical Information" documentsavailable is provided in the "Documentation" section ä 153.Process connectionsPage 138 ff.10.1.11 OperabilityDisplay elementsOperating elementsLanguage groups!Note!• Liquid crystal display: illuminated, four lines with 16 characters per line• Selectable display of different measured values and status variables• At ambient temperatures below –20 °C (–4 °F) the readability of the display may be impaired.• Local operation with three optical keys (S/O/F)• Application-specific Quick Setup menus for straightforward commissioningLanguage groups available for operation in different countries:• Western Europe and America (WEA):English, German, Spanish, Italian, French, Dutch and Portuguese• Eastern Europe and Scandinavia (EES):English, Russian, Polish, Norwegian, Finnish, Swedish, Czech• South and East Asia (SEA):English, Japanese, Indonesian•China(CN):English, ChineseYou can change the language group via the operating program "FieldCare".Issue/Rev. 0.2 (12/12) MN0M030 • Page 151