Proline Promass 83E/F/O Modbus RS485 Operating Instructions
Proline Promass 83E/F/O Modbus RS485 Operating Instructions
Proline Promass 83E/F/O Modbus RS485 Operating Instructions
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Proline</strong> <strong>Promass</strong> 83 <strong>Modbus</strong> <strong>RS485</strong>Technical dataInstallation instructions ä 1410.1.7 <strong>Operating</strong> conditions: InstallationInlet and outlet runsThere are no installation requirements regarding inlet and outlet runs.Length of connecting cable;remote versionmax. 20 m (65 ft)System pressure ä 1510.1.8 <strong>Operating</strong> conditions: EnvironmentAmbient temperature rangeStorage temperature!Note!Messaufnehmer und -umformer:• Standard: –20 to +60 °C (-4 to +140°F)• Optional: –40 to +60 °C (-40 to +140°F)• Install the device at a shady location. Avoid direct sunlight, particularly in warm climatic regions.• At ambient temperatures below –20 °C (–4 °F) the readability of the display may be impaired.–40 to +80 °C (–40 to +175 °F); preferably +20 °C (+68 °F)Degree of protectionStandard: IP 67 (NEMA 4X) for transmitter and sensorShock resistance According to IEC 68-2-31Vibration resistance Acceleration up to 1 g, 10 to 150 Hz, following IEC 68-2-6CIP cleaningYesSIP cleaningYesElectromagnetic compatibility(EMC)To IEC/EN 61326 and NAMUR Recommendation NE 21Issue/Rev. 0.2 (12/12) MN0M030 • Page 133
Change language