Atria 6100 Operator's manual - Roxon

Communications OptionsA Directory Full message displays if a new patient is started and all recordsin the directory do not meet any of the automatic deletion criteria. A newrecord is allowed only if one of the following actions is taken:• Print at least one unprinted record• Send at least one unsent record (Atria with communicationoption only)• Acquire at least one demographics-only record• Delete at least one record from the directoryWhen the directory is full you may, however, obtain ECG printouts. Thesewill not be stored in the directory unless storage space is available.Communications OptionsSending ECG Records to an EMR SystemNOTE: Using the send feature requires thecommunications option. See “Communications Setup” onpg. 5-1.Use the send feature to send the record to either the EMR system ornetwork share, based on the EMR connection setting (see “Setup EMRCommunications” on pg. 5-12).The Atria can send records in a batch or as all new records. Follow theinstructions under “Send All New or Selected ECGs”.Alternatively, you have can review each records to send. In reviewing thesend status for each record, you have the option of placing individualrecords on hold, which prevents the record from being sent (until its statusis changed again). To send selected records only, first follow theinstructions under “Select Records to Send”, then continue with “Send AllNew or Selected ECGs”.SEND ALL NEW OR SELECTED ECGS1. Press [Send/Rec].2. Press [Select].Atria displays the status of the transmissions.Atria Electrocardiograph Operating Instructions 8-7