Atria 6100 Operator's manual - Roxon

7 Acquiring ECG ReportsPlain Paper PrintingThe Atria can be configured to print ECGs to a plain paper printer.!CautionData loss. Always check plain paper printouts before disconnecting thepatient and ending the procedure.Printing Problems (Thermal Printer)If the Atria runs out of paper or if the paper jams while printing an ECG,either reload the paper and continue printing, or press [Stop] to save therecord without printing.For paper loading instructions see “Loading Recording Paper” on pg. 2-5 orpress [ALT] + [H] to access the Help menu and then select Loading Paper.Saving ReportsThe Atria automatically saves ECGs. If the Atria is set up for networkaccess, the ECG can also be automatically sent or emailed. For moreinformation, see “Sequence” on pg. 4-5.NOTE: To disable automatic saving of ECG reports, see“Auto Save” on pg. 4-5.After the ECG has been saved, the Patient Review menu is displayed. See“How to Display a Patient Record” on pg. 8-2.ECG TipsPatient Data and Interpretation• Enter all patient information. Some patient informationdirectly affects ECG analysis. The physician uses thisinformation when interpreting ECG reports. Also, aninterpretive Atria provides more accurate and completeanalysis statements when patient information is complete.• Enter patient information at any time (either before or afterthe ECG). Changing age, gender, race, medication or clinicalclassification after acquisition, causes the interpretive Atriato prompt to reanalyze the data. Any changes ininterpretation are included in future printouts. If the data isnot reanalyzed, edits are not saved.7-4 Atria Electrocardiograph Operating Instructions