Atria 6100 Operator's manual - Roxon

Acquiring an ECG Using Pediatric Lead PlacementsAcquiring an ECG Using Pediatric Lead PlacementsIn order to use pediatric lead placements, the V3 placement feature mustbe enabled. See “V3 Placement” on pg. 4-12. To configure the Atria toalways acquire ECGs using pediatric lead refer to “ECG Settings” onpg. 4-2.1. Prepare the pediatric patient, refer to:• Chapter 6, “Patient Preparation.”• “Pediatric Chest Lead Placement” on pg. 6-8.2. Follow steps for “Acquiring ECG Reports” on pg. 7-1.• For V3 Placement, select V4R.NOTE: In the Edit Patient Data field, change the Age Formatto months and enter the patient’s age in months, or enter theDate of Birth, and the Atria calculates the age automatically.3. Verify the patient’s heart rate displays on the Home screen. If heartrate does not display, view problem leads on the display. Replace faultyelectrodes as necessary.4. Enter patient demographics.NOTE: To acquire a stat ECG, press [ECG] and then press[Select] or [ECG] to select Acquire STAT ECG for a new patient.5. Press [ECG].6. Use the navigation buttons to display Acquire ECG, current patient datathen press [Select].ECG ReportsThe Atria automatically includes a formatted 12-lead report withdemographics in any ECG printout. Additionally, an Atria with the optionalinterpretation feature automatically prints the interpretive analysis on thereport (this feature can be disabled).The Atria can also automatically print the following pages with the ECG:• Rhythm page• Copies of ECG, with or without analysis• Median complex report (interpretive Atria only)For more information on enabling these reports, or to disable automaticprinting, see “Report Format” on pg. 4-2.Atria Electrocardiograph Operating Instructions 7-3