Atria 6100 Operator's manual - Roxon

Setup EMR Communications7. Enter the Institution Number.The Institution number is transmitted to the EMR system with theECG record. Enter 1, unless the server services multiple institutions.8. Enter a Device ID.The Device ID is transmitted to the EMR system with the ECG record.Enter a unique number to identify this specific ECG device.REGISTER THE ATRIA WITH THE WEB SERVER1. Press [Home] and then press [Setup].2. Select Send Receive > Register Device with Web Services.3. Enter the Web Services Provider ID.For more information, see your EMR administrator.4. Enter the Web User ID.5. Enter the Web Password.6. Verify the Atria is connected to the network with either a 802.11 or anethernet cable.7. Press [Send/Rec].After a few seconds the Atria displays a list of one or more institutions.8. Select the institution that matches the Institution ID entered in step 7.,“Configure Web Service” on pg. 5-12.9. Press [Send/Rec] to send the registration.NOTE: If the Atria reports errors, the communications logcontains more information regarding the errors. To print thecommunications log: Press [Setup] and then select PrintCommunications Log. For more information, press [ALT] + [H]to access the Help menu and select Troubleshooting >Communications.DOWNLOAD THE EMR-SUPPLIED CUSTOM HEADERNOTE: The Atria must be registered before performingthis procedure, see “Register the Atria with the Web Server”on pg. 5-131. Press [Home] and then press [Send/Rec].2. Select Get Custom Header.After a few seconds the Atria displays a list of one or more customheaders.Atria Electrocardiograph Operating Instructions 5-13