Atria 6100 Operator's manual - Roxon

5 Communications SetupSetup Fax!WARNINGMisdiagnosis. Records sent by fax may not be suitable for diagnostic usedue to the low resolution of some fax receiving equipment.Enter up to four 20-digit fax numbers (include outside line access number,if necessary).1. Connect telephone line to the RJ11 port.NOTE: See “Equipment Connections” on pg. 5-2 for Atriaconnection diagrams. The modem will not work if phone cordis connected to the network port).2. Press [Home] and then press [Setup].3. Select Send Receive > Setup Fax > Enabled and then select eitherTOUCH TONE or Pulse.4. For each fax, enter a fax number and description.5. Verify fax operation:a. Press [Home] then press [ECG] twice.b. Select Fax ECG.c. Select the fax destination and verify the receiving fax machinesuccessfully prints out the ECG.Setup Email!WARNINGMisdiagnosis. ECG reports images viewed or printed in .pdf format at asize other than 100% may be appear distorted.Network setup is required in order to use the email option. See “NetworkSetup” on pg. 5-3.Refer to “Equipment Connections” on pg. 5-2.• For Ethernet network, connect to network via RJ45 port.• For 802.11, connect to the 802.11 USB port.The Atria emails ECG reports in .pdf format.1. Press [Home] and then press [Setup].5-10 Atria Electrocardiograph Operating Instructions