10.07.2015 Views

Atria 6100 Operator's manual - Roxon

Atria 6100 Operator's manual - Roxon

Atria 6100 Operator's manual - Roxon

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

External Printer Setup• Start Find Local Printers—This starts the process to find localprinters.- The <strong>Atria</strong> automatically selects the printer. If the<strong>Atria</strong> finds more than one printer, use thenavigation buttons to select the printer, and thenpress [Select].FOR NETWORKED PRINTERS ONLY:6. Enter the Printer IP address7. Select Printer Type:• PCL3 (DeskJet)• Postscript• PCL5 (LaserJet)Printer Connection1. Setup the printer per manufacturer’s instructions.2. Connect printer to <strong>Atria</strong>. Refer to “Equipment Connections” on pg. 5-2.• Ethernet network—Connect network cable to RJ45 port(printer must also be connected to network).• Wireless network—Connect the 802.11 USB adapter.• USB printer—Connect to USB port.• BlueTooth printer—Connect BlueTooth adapter to USB port.• PPP network—For an internal modem: Connect the phonecable. For an external modem: Connect the modem andphone cable.Verify Printer OperationNOTE: In order to perform this procedure: the patientcable must be plugged in and Setup > ECG > Sequence >Auto Print is set to ON and Setup > ECG > Sequence >Auto Save is set to ON.• Press [Home] then press [ECG] twice.• The <strong>Atria</strong> automatically prints the ECG on the defaultprinter. To configure the default printer select Setup > Printer> Default Printer.<strong>Atria</strong> Electrocardiograph Operating Instructions 5-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!