Atria 6100 Operator's manual - Roxon

Atria 6100 Operator's manual - Roxon Atria 6100 Operator's manual - Roxon

10.07.2015 Views

5 Communications SetupCONFIGURE THE ATRIA TO USE THE SUPPLICANT CONFIGURATION1. Press [Home] and then press [Setup].2. Select Send Receive > Setup Network Connection from the Setup menu.3. Select the following options:a. Network Type select 802.11.b. Use DHCP select ON or OFF.c. Wireless Security select Supplicant Config.4. To complete the setup, configure Email, see “Setup Email” on pg. 5-10and EMR Communications “Setup EMR Communications” on pg. 5-12.External Printer Setup!WARNINGShock hazard. Plain paper printers must be compliant with IEC 60950.External printing requires network setup. See “Network Setup” on pg. 5-3.Atria Printer ConfigurationPlain paper printing is available for all printing except Manual and AutoRhythm printouts.1. Press [Home] and then press [Setup].2. Select Printer > Plain Paper Printing and either:• Local (USB or BlueTooth).• Network (Ethernet or 802.11)• Off (No printing)3. Select the Default Printer:• Thermal (Atria)• Plain Paper (external printer).FOR LOCAL PRINTERS ONLY:4. Select Printer Type:• PCL3 (DeskJet)• Postscript• PCL5 (LaserJet)5. Select Find Local Printers:• Do Not Find Local Printers5-8 Atria Electrocardiograph Operating Instructions

External Printer Setup• Start Find Local Printers—This starts the process to find localprinters.- The Atria automatically selects the printer. If theAtria finds more than one printer, use thenavigation buttons to select the printer, and thenpress [Select].FOR NETWORKED PRINTERS ONLY:6. Enter the Printer IP address7. Select Printer Type:• PCL3 (DeskJet)• Postscript• PCL5 (LaserJet)Printer Connection1. Setup the printer per manufacturer’s instructions.2. Connect printer to Atria. Refer to “Equipment Connections” on pg. 5-2.• Ethernet network—Connect network cable to RJ45 port(printer must also be connected to network).• Wireless network—Connect the 802.11 USB adapter.• USB printer—Connect to USB port.• BlueTooth printer—Connect BlueTooth adapter to USB port.• PPP network—For an internal modem: Connect the phonecable. For an external modem: Connect the modem andphone cable.Verify Printer OperationNOTE: In order to perform this procedure: the patientcable must be plugged in and Setup > ECG > Sequence >Auto Print is set to ON and Setup > ECG > Sequence >Auto Save is set to ON.• Press [Home] then press [ECG] twice.• The Atria automatically prints the ECG on the defaultprinter. To configure the default printer select Setup > Printer> Default Printer.Atria Electrocardiograph Operating Instructions 5-9

5 Communications SetupCONFIGURE THE ATRIA TO USE THE SUPPLICANT CONFIGURATION1. Press [Home] and then press [Setup].2. Select Send Receive > Setup Network Connection from the Setup menu.3. Select the following options:a. Network Type select 802.11.b. Use DHCP select ON or OFF.c. Wireless Security select Supplicant Config.4. To complete the setup, configure Email, see “Setup Email” on pg. 5-10and EMR Communications “Setup EMR Communications” on pg. 5-12.External Printer Setup!WARNINGShock hazard. Plain paper printers must be compliant with IEC 60950.External printing requires network setup. See “Network Setup” on pg. 5-3.<strong>Atria</strong> Printer ConfigurationPlain paper printing is available for all printing except Manual and AutoRhythm printouts.1. Press [Home] and then press [Setup].2. Select Printer > Plain Paper Printing and either:• Local (USB or BlueTooth).• Network (Ethernet or 802.11)• Off (No printing)3. Select the Default Printer:• Thermal (<strong>Atria</strong>)• Plain Paper (external printer).FOR LOCAL PRINTERS ONLY:4. Select Printer Type:• PCL3 (DeskJet)• Postscript• PCL5 (LaserJet)5. Select Find Local Printers:• Do Not Find Local Printers5-8 <strong>Atria</strong> Electrocardiograph Operating Instructions

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!