Atria 6100 Operator's manual - Roxon

Network Setup3. Enter the following:a. When DHCP is OFF enter:- IP address (IP Address for the Atria, typicallyassigned by the network administrator.)- Subnet Mask (typically 255.255.255.0).- Gateway (IP address for the Gateway.)b. Select appropriate options based on the Wireless Securitysettings. Refer to the table below.NoneWEPWireless SecuritySettingWPA or WPA2 PersonalSupplicant ConfigFor more information onconfiguring and alternativesecurity option see “SecuritySettings: SupplicantConfiguration” on pg. 5-6.WPA or WPA2 EnterpriseSetting OptionsWireless SSID 1Wireless Channel 2UTC/GMT Time Zone Offset 4Wireless AuthenticationWireless SSID 1Wireless Channel 2Encryption key 1Encryption key 2Encryption key 3Encryption key 4UTC/GMT Time Zone Offset 4Wireless SSID 1WPA/WPA2 Passphrase 3UTC/GMT Time Zone Offset 4UTC/GMT Time Zone Offset 4Wireless SSID 1WPA/WPA2 Enterprise IDWPA/WPA2 Enterprise Password 3UTC/GMT Time Zone Offset 41The Wireless SSID, and the WPA/WPA2 Passphrase is either SSID orDSSID as configured on the wireless access point.2The Wireless Channel is configured on the wireless access point.3The WPA/WPA2 Enterprise ID, and the WPA/WPA2 EnterprisePassword is configured on the RADIUS Authentication server.4 See the Time Zone instructions and note on 5-4 for configuring theUTC/GMT Time Zone Offset.Atria Electrocardiograph Operating Instructions 5-5