Atria 6100 Operator's manual - Roxon

Chapter5 Communications Setup!WARNINGMisdiagnosis. Electromagnetic interference may cause trace noise orinput overload conditions. This may be caused by the presence of strongEMI fields, or generated by RF noise on the line power, or by electronic,surgical, or diathermy instruments in close proximity to the Atria. Positionthe Atria away from other electrical or electronic equipment, if possible.If used with, or around, other electrical or electronic equipment, alwayscarefully monitor initial readings to verify normal operation.The Atria is compliant with IEC 60601-1-2 EMC immunity requirements.Refer to “EMC Declaration Tables” on pg. 11-10.External communications are optional on the Atria.For assistance in determining which options are available on your Atria, orto purchase additional options, call Customer Service at (800) 777-1777 or(608) 764-1919.Base communications options include:• Serial Communications (RS232)• Wired Ethernet• USB• Analog OutThe following features require the Communications options:• Email• Fax• Plain paper printing• EMR communicationsAdditional communication options include:• Internal Fax/Modem• BlueTooth connection• 802.11 network connection• PPP connectionNOTE: Wireless options transmit at 2.4 GHz. Othernearby wireless devices may cause interference. If possible,move or turn off other devices to minimize potentialinterference.Setting up any of the communications options listed above may requireassistance from the Network Administrator or IT department.Atria Electrocardiograph Operating Instructions 5-1