Atria 6100 Operator's manual - Roxon

Chapter4 User SettingsOverviewThe Settings menu sets defaults for each use. For example, to default to again of 5 mm/mV, press [Setup] then select Waveform Preferences > Gain >5 mm/mV. For each use, the gain will default to 5 mm/mV.Multiple UsersMost Atria settings (except for system settings and communicationsettings) can be configured for either User 1 or User 2:For example, if the Atria used by two different doctors:• Dr. Miller: Brief format interpretation, two copies of theECG, ECG speed of 12.5 mm/sec and gain of 5 mm/mV.Select User 1 and enter Dr. Miller’s preferences.• Dr. Carrera prefers the Full format interpretation, one copyof the ECG, ECG speed of 25 mm/sec and gain of 10 mm/mV.Select User 2 and enter Dr. Carrera’s preferences.1. To determine the current user:• Atria 3100: Press [Setup]. The current user displays to theright of the menu title.• Atria 6100: The current user is shown in the lower rightcorner of the display.2. Press [Home] and then press [Alt] + [1] to select User 1 or press [Home]and then press [Alt] + [2] to select User 2.The Atria requires a restart to change users.3. Press any key to restart.Password ProtectionUse a password to prevent unauthorized settings changes.Refer to either:• “Administrative Password” on pg. 4-13.• “Directory Password” on pg. 4-14.Atria Electrocardiograph Operating Instructions 4-1