Atria 6100 Operator's manual - Roxon
Atria 6100 Operator's manual - Roxon Atria 6100 Operator's manual - Roxon
3 User InterfaceLabel Text DescriptionCSelected leadconfigurationFigure above shows default. Press keys 1 through 6for alternate configurations.D Sensor status Indicates signal quality.If signal quality is bad, the display indicates theproblem (Fail, Drift, or Noise) and shows whichsensor is affected.ESettings Information Displays user settings.Press the key indicated to change:• [9] - Stable 40 Hz or 150 Hz• [7] - 25 mm/s, 50 mm/s, 12.5 mm/s• [8] - 10 mm/mV, 20 mm/mV, L=10 C=5, L=20C=10, 5 mm/mV• [Alt] + [1] User 1 settings• [Alt] + [2] User 2 settingsF Power Status Indicates power source and status.AC - the Atria is connected to external power.Low - low batteryBat - the Atria is powered by the batteryAtria 6100 Menu ScreensUse the Menu keys to go to one of the main menus:• [Patient] — Enter patient demographics• [Directory] — Display the patient directory• [Setup] — Change system settings• [Send/Rec] — Communications optionsNOTE:Press [ALT] + [H] to access the Help menu.Each menu or list item has an associated hot key. The hot key is indicatedby the letter underlined on the list item. For example, the list item Yearsmay be selected by pressing [Y].Some List fields have default settings. For example, the default setting forAge Format is Years.The example below shows how to navigate a menu screen to enter patientdemographics.3-8 Atria Electrocardiograph Operating Instructions
Display Atria 6100Figure 3-4Atria 6100Patient SourceSelection MenuEnter New PatientCurrent PatientView Patient DirectoryJane Smith (999999999)Patient Source Selection60Sensors OKPress PatientStable 40 Hz25 mm/s10/mm/mVUser: 1AC1. If the Home screen is not displayed, press [Home].2. Press [Patient].3. Press [Select]. The Enter/Edit Patient ID entry field displays.4. Enter patient information and press [Select]. The next entry field automaticallydisplays.NOTE: To review or change an entry, press the [Back] keyto go to the Select Field to Edit menu. Use [Previous] or [Next]and to scroll to a field and then press [Select] to enter orchange the information.5. When all demographic information is entered, press [Home] to returnto the Home screen.Atria Electrocardiograph Operating Instructions 3-9
- Page 1 and 2: OperatingInstructionsAtria 3100 Ele
- Page 3 and 4: Table of ContentsIntended Use . . .
- Page 5 and 6: Intended UseUnder the supervision o
- Page 7 and 8: Manufacture dateManufactured for008
- Page 9: Quick StepsAtriaElectrocardiographC
- Page 12 and 13: 1 General Information• Battery or
- Page 14 and 15: 1 General InformationHelp MenuTo ac
- Page 16 and 17: 2 Equipment Setup!!WARNINGMisdiagno
- Page 18 and 19: 2 Equipment SetupPower IndicatorA g
- Page 20 and 21: 2 Equipment Setup6. Slide the door
- Page 22 and 23: 3 User InterfaceFigure 3-2User Inte
- Page 24 and 25: 3 User InterfaceFunction Key Descri
- Page 30 and 31: 3 User InterfaceDisplay Atria 3100T
- Page 32 and 33: 3 User Interface3-12 Atria Electroc
- Page 34 and 35: 4 User SettingsSetup MenuThe Setup
- Page 36: 4 User SettingsECGMenu Items:Report
- Page 39 and 40: Waveform PreferencesWaveform Prefer
- Page 41 and 42: RhythmRhythmTo print rhythm reports
- Page 43 and 44: Patient SettingsRhythmMenu Items:Se
- Page 45 and 46: System SettingsSystem SettingsUse t
- Page 47 and 48: Chapter5 Communications Setup!WARNI
- Page 49 and 50: GroundingGroundingAll connected equ
- Page 51 and 52: Network Setup3. Enter the following
- Page 53 and 54: Network SetupCREATE A SUPPLICANT CO
- Page 55 and 56: External Printer Setup• Start Fin
- Page 57 and 58: Setup Email2. Select Send Receive >
- Page 59 and 60: Setup EMR Communications7. Enter th
- Page 61 and 62: Chapter6 Patient Preparation!!!WARN
- Page 63 and 64: Sensor ApplicationSensor Applicatio
- Page 65 and 66: Disposable Resting ECG SensorsDispo
- Page 67 and 68: Reusable ECG Sensors3. Squeeze out
- Page 69 and 70: Alternative Lead PlacementsAcquire
- Page 71 and 72: Chapter7 Acquiring ECG ReportsAcqui
- Page 73 and 74: Acquiring an ECG Using Pediatric Le
- Page 75 and 76: Change Recorder Speed, Gain, Freque
3 User InterfaceLabel Text DescriptionCSelected leadconfigurationFigure above shows default. Press keys 1 through 6for alternate configurations.D Sensor status Indicates signal quality.If signal quality is bad, the display indicates theproblem (Fail, Drift, or Noise) and shows whichsensor is affected.ESettings Information Displays user settings.Press the key indicated to change:• [9] - Stable 40 Hz or 150 Hz• [7] - 25 mm/s, 50 mm/s, 12.5 mm/s• [8] - 10 mm/mV, 20 mm/mV, L=10 C=5, L=20C=10, 5 mm/mV• [Alt] + [1] User 1 settings• [Alt] + [2] User 2 settingsF Power Status Indicates power source and status.AC - the <strong>Atria</strong> is connected to external power.Low - low batteryBat - the <strong>Atria</strong> is powered by the battery<strong>Atria</strong> <strong>6100</strong> Menu ScreensUse the Menu keys to go to one of the main menus:• [Patient] — Enter patient demographics• [Directory] — Display the patient directory• [Setup] — Change system settings• [Send/Rec] — Communications optionsNOTE:Press [ALT] + [H] to access the Help menu.Each menu or list item has an associated hot key. The hot key is indicatedby the letter underlined on the list item. For example, the list item Yearsmay be selected by pressing [Y].Some List fields have default settings. For example, the default setting forAge Format is Years.The example below shows how to navigate a menu screen to enter patientdemographics.3-8 <strong>Atria</strong> Electrocardiograph Operating Instructions
Change language