Atria 6100 Operator's manual - Roxon

KeyboardKeyboardThe following table describes the Atria keys.NOTE:Not all key functions are available on every screen.Function Key DescriptionMain Power [On/Stby] Powers on the AtriaWhen the Atria is on, press this key to:• Power off the Atria when operating on battery power.• Go to Standby when connected to external power(The battery continues to charge.)UserAt the Home screenECGPress [Stop] at anytime stop printingand return to theHome screen[Alt]+ [1] or [2][ECG][Auto Rhythm][Manual Rhythm]Select either User 1 or User 2. See “Multiple Users” onpg. 4-1.Acquire and print a 12-lead ECG (a series of reportsusing pre-programmed lead sequences and settings).Print an auto rhythm report (a rhythm strip with a preselectednumber of pages using the leads currentlyselected).Print a manual rhythm report (a continuous rhythm stripof the leads currently selected). This report runs until the[Stop] key is pressed.ECG Settings(Number Keys)[1], [2], [3], or [4] To select pre-programmed lead triplets. The leads areprinted on manual rhythm and auto rhythm reports.[5] or [6] Custom lead 1 or Custom lead 2 to select user-definedleads.The leads are printed on manual rhythm and auto rhythmreports. See “Custom Lead Settings” on pg. 4-9 for setupinformation.[7] Select paper speed (12.5, 25, or 50 mm/sec).[8] Select ECG gain (5 mm/mV, 10 mm/mV, 20 mm/mV; L10,C5 mm/mV; or L20, C10 mm/mV.[9] Toggles the upper ECG filter frequency response (40 or150 Hz).[0] For a 1 mV calibration pulse on auto or manual rhythmprintouts.Atria Electrocardiograph Operating Instructions 3-3