Atria 6100 Operator's manual - Roxon

Atria 6100 Operator's manual - Roxon Atria 6100 Operator's manual - Roxon

10.07.2015 Views

11 Maintenance and ServiceEMC Declaration Tables!WARNINGElectromagnetic interference. Position the Atria away from other electricalor electronic equipment, if possible. The presence of strong EMI fields, orgenerated by RF noise on the line power, or by electronic, surgical, ordiathermy instruments in close proximity to the Atria may cause tracenoise or input overload conditions.If used with, or around, other electrical or electronic equipment, alwayscarefully monitor initial readings to verify normal operation.The Atria is compliant with IEC 60601-1-2 EMC immunity requirements.Refer to “EMC Declaration Tables” below.The Atria is intended for use in the electromagnetic environment specifiedbelow.Electromagnetic EmissionsEmissions testRF emissionsCISPR 11RF emissionsCISPR 11Harmonic emissionsIEC 61000-3-2Voltage fluctuations/flicker emissionsIEC 61000-3-3ComplianceGroup 1Class BClass BCompliesElectromagnetic environment -guidanceThe Atria uses RF energy only for itsinternal function. Therefore, its RFemissions are very low and are not likely tocause any interference in nearby electronicequipment.The Atria is suitable for use in allestablishments.11-10 Atria Electrocardiograph Operating Instructions

EMC Declaration TablesElectromagnetic ImmunityImmunity testElectrostaticdischarge (ESD)IEC 61000-4-2Electrical fasttransient/burstIEC 61000-4-4SurgeIEC 61000-4-5Voltage dips, shortinterruptions andvoltage variationson power supplyinput linesIEC 61000-4-11Power frequency(50/60 Hz)magnetic fieldIEC 61000-4-8IEC 60601test level±6 kV contact±8 kV air±2 kV for powersupply lines±1 kV forinput/outputlines±1kv differentialmode±2 kV commonmode

EMC Declaration TablesElectromagnetic ImmunityImmunity testElectrostaticdischarge (ESD)IEC <strong>6100</strong>0-4-2Electrical fasttransient/burstIEC <strong>6100</strong>0-4-4SurgeIEC <strong>6100</strong>0-4-5Voltage dips, shortinterruptions andvoltage variationson power supplyinput linesIEC <strong>6100</strong>0-4-11Power frequency(50/60 Hz)magnetic fieldIEC <strong>6100</strong>0-4-8IEC 60601test level±6 kV contact±8 kV air±2 kV for powersupply lines±1 kV forinput/outputlines±1kv differentialmode±2 kV commonmode

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!