Atria 6100 Operator's manual - Roxon

10 TroubleshootingPROBLEMThe Atria will not send records viamodem/fax function not working.The Atria displays “Directory Full”message.All printouts show Alternate Chest LeadECG or RIGHT CHEST LEAD ECG.PROBABLE CAUSE• Verify the Atria is connected to a phonejack.• Verify the Atria contains an internalfax/modem; contact your localrepresentative or Cardiac ScienceCorp. Technical Support Departmentfor assistance.• Verify the phone number anddescription fields are correctly filled in.These are found in the Setup > SendReceive > Setup FAX menu item.• Verify the correct phone type andconnection type are selected in theSetup > Send Receive > Setup FAXmenu item.• Verify the phone cord is functioning.• Records in the directory are eitherdemographics-only, have not beenprinted or have not been sent (with thecommunications option). See“Automatic deletion when the Directoryis full” on pg. 8-6 for more information.• Custom 1 or Custom 2 is configured toAlternate Chest Lead. Configuresetting to any other format (see“Custom Lead Settings” on pg. 4-9).Trace ProblemsBefore troubleshooting trace problems, ensure the following:• Good quality electrodes are used• The electrodes are not dried out• The skin is properly prepared and the electrodes are appliedcorrectly, with good contact to the skin• Electrodes are not dirty• Lead wires are securely attached to all electrodes• The ECG cable is securely plugged into the Atria10-2 Atria Electrocardiograph Operating Instructions