The New Paradigm of Security - Inter-Pacific

input line and our biometric data line will be connected to the installed control panel.26 bit Wiegand or higher output format support as a slave readerLX006SR and LX006SRB models are available with Mifare Smart Card Reader.ISO 14443 Type A CompatibleThe LX006SRB finger template capacity of user shall be related with the cardholder capacity of its control panel.*SR series shall read the serial number of Mifare card and SRB shall read designated Mifare sectors’ dataUL, CE, RoHS Compliance, and FCC approved.One year Warranty.Additional information and specs can be obtained at www.rflogicsinc.comFGR006 Finger Biometric Slave ReaderThe FGR006 is a Finger Biometric Slave Reader for the 3rd party’s controller integration.It has a 4’’ built-in proximity reader and a fingerprint module with solid optical sensorfor high reliability and easy operation.Verification and Data Transfer to Control Panel: This user-friendly device allows easyregistration of a proximity card and two fingerprint templates for each user. Once theEnrolled Fingerprints are verified, user’s proximity card with Wiegand 26 or higher dataformat will be transferred to the connected control panel.Finger Template Enrollment with the 3 rd party’s control panel will be done fromregistration unit and/or local units, those enrolled finger templates can be distributed to thelocal installed finger units’ batch or individually via StarWatch Fingerprint Reader ProS/W. (See details of StarWatch Fingerprint Reader Pro)The FGR006 can accommodate 1,000 users (optional 2,000 and 4,000 users)Verification of Finger template using proximity card takes less than 1 Sec and 1: many up to 4,000 will beless than 2 Sec.Resolution of Finger Template: 500dpi / FAR (False Acceptance Ratio): 0.001%FRR (False Rejection Ratio): 0.1% / Verification Time: < 1 sec / Identification Time: < 2 secAn optional built-in Auto touch sensor for 1: many, Finger Only Mode of 1,000, 2,000 and 4,000 are available26 bit Wiegand or higher output format support as a slave readerFGR006-EX Series will be able to upgrade the existing proximity and magnetic reader system to FingerBiometric using the same cards without any replacements. The existing reader will be connected to theFGR006-EX reader input line and our biometric data line will be connected to the installed control panel.IDTeck FGR006 adapted various user-friendly operation of card only mode for people with scarred finger tips orwith no finger templates at all.26