Power quality analyzers - Circutor

Power quality analyzersM-8IO / M-8IORDevice module with 8 inputsand 8 digital outputsDescriptionFeaturesM-8IO / M-8IOR is a device with 8 programmableinputs and 8 digital programmableoutputs (transistor or relay). Thedevice has an integrated Web serverenabling it to perform all the requiredconfiguration. The digital inputs enableit to count the pulses sent by other devices(ex. energy, water or gas meters) aswell as log the status changes of externalrelays (ex. MCB or PLC). The digitaloutputs enable it to configure alarms,energy pulses and even remote controlfunctions.Being another SGE system module letsseveral 8IO modules connect to eachother (up to 4) or with other SGE modules(ex. QNA500) to extend the product'sfunctionality.ApplicationM-8IO permits interaction with other SGEmodules, enabling comprehensive controlof the electrical installation by centralizingof the energy pulses of meters, controllingthe alarms that may be produced at thehead-end of the electrical installation andeven sending these alarms to other SCA-DA or PLC systems.Auxiliary Power Supply (BASE)Power supply voltageFrequencyConsumptionAuxiliary battery power supply (BASE)TypeBattery lifeDigital inputs (8IO)Working voltageMinimum signal widthElectrical consumption (per input)Digital outputs (8IO)TypeWorking voltageWorking currentPulse weightDigital outputs per Relay (8IOR)TypeNominal voltageNominal currentMemoryProcessorSampling frequencyConverterConnectionMaximum cross-section of the cableReferencesM-8IOM-8IOR90 - 300 V a.c.- 130 - 380 V d.c.50 ... 60 Hz7 W / 11 VA (BASE)4 W / 5 VA (QNA500)6 W / 10 VA (8IO)Removable battery1 minute of continuous operation (8IO)12 - 18 V dcConfigurable2.5 mWOptocoupled250 V130 mAConfigurableRelay250 V ac/ 30 A dc6 A512 samples/cycle24 bits2.5mm 2 (power supply)1mm 2 (inputs / outputs)Q20902Q209032Gb (MicroSD card)Q2-9