Increase Visibility and Enhance Skid-Resistance

Increase Visibility andEnhance Skid-ResistanceT-28 Color-Safe Surface is an acrylic basedresin system used for area markings andanti-skid surfacing. The resin and aggregatecompounds are capable of full cure in a widerange of temperatures without requiringexternal heat sources.T-28 is typically used for demarcation of bicycle and pedestrian paths,bus lanes and stops and other specially designated areas. It can also beused as a surface coat to enhance skid-resistance on hazardous turnsand other high accident areas on asphalt and concrete roadways.T-28 Color-Safe Surface is applied as a single coat system containingskid-resistant aggregate.Features and AdvantagesVariety of Colors and Aggregate SizesSkid-Resistant SurfaceAlerts Drivers to Special-Use Traffic LanesExcellent Color Retention and DurabilityEasy ApplicationFast Cure TimeLow Life Cycle CostStrong Adhesion to Concrete and Asphalt SurfacesLong-LastingPositive DemarcationEnhances Traffic Calming

Application ProcedureSurfaces receiving T-28 must be thoroughly cleaned andfree of all dirt. Contaminates that might interfere withthe proper adhesion of the material must be removed bysandblasting or shot-blasting.T-28 Color-Safe Surface resin system comes in threecomponents: T-28 resin, catalyst and aggregate. Thesecomponents must be mixed thoroughly for uniformcuring and performance.T-28 is applied by mixing, placing and finishing in asingle application to the specified project thickness.The single application of the material reduces thepossibility of contamination that exists with multiplecoat application methods.Acrylic Physical Properties*Properties Unit of Measure TestNeat ResinTensile Strength 2000 psi (14 MPa) min) ASTM D638Elongation 70% ASTM D638Tensile Modulusof Elasticity 1370 psi (9.5 MPa) min ASTM D638Hardness 15-20 Shore D ASTM 2240Water Absorption 0.25%Pot Life @72 0 F (22 0 C) AASHTO T237Flash Point 50 0 F (10 0 C) ASTM D1310Solids Content 100% ASTM D1644AggregateHardness 7.0 Mohs ScaleBulk Density(Aerated) 92-95lb/ft 3 ASTM C29Bulk Density(Compacted) 98-100lb/ft 3 ASTM C29* To be used as general guidelines onlyNo special spray or mixing equipment is required forinstallation.ApplicationsEach unit of T-28 consists of: 2 gallons of pigmented resin ina 5 gallon mixing bucket, 1 bag of skid-resistant aggregate(27lbs.) and .5lbs of catalyst.Transpo’s T-28 Color-Safe Surface should be usedas an anti-skid surface or to demark various areas:Bicycle PathsSchool ZonesBus Lanes and StopsIntersectionsWalking PathsToll LanesSpeed ZonesTurns and CurvesHazardous Road Areas20 Jones Street, New Rochelle, NY 10801Tel: 914-636-1000 • Fax: 914-636-1282www.transpo.com • info@transpo.com2/10 2K9 0 0 l/2000