References of Bioplastics technology - Nec

Performing Rewritable Shape Memory”, Polymer Processing and Society (PPS)Japan, Proceedings,187 (2006).・ Kazuhiko Inoue, Midori Yamashiro, Masatoshi Iji, “Thermo-reversiblyCross-linked Biomass-plastic Acting Rewritable Shape Memory”, Int. Symp. onEnvironmentally Conscious Design & Inverse Manufacturing (EcoDesign), Japan,(2005).・ Kazuhiko Inoue, Midori Yamashiro, and Masatoshi Iji, "Thermo-reversiblycross-linked polylactic acid acting rewritable shape memory", 230th ACSNational Meeting & Exposition, Washington DC, USA, Proceedings, 93, 967(2005).・ Midori Yamashiro, Kazuhiko Inoue, Masatoshi Iji, “Intelligent Bio-plasticsPerforming Rewritable Shape Memory”, Int. Conf. on Organic MaterialsTechnology (ORGA TECHNO) , Japan , Proceedings, 290 (2005).・Shin Serizawa, Kazuhiko Inoue, Masatoshi Iji, “Kenaf Fiber-Reinforced PolylacticAcid Used for Electronic Products”, Int. Conf on Eco-Materials (ICEM),Singapore, (2005).・Yukihiro Kiuchi, Masatoshi Iji, “Flame-retarding Epoxy-laminate-type PrintedWiring Board with No Use of Halogen and Phosphorus Compounds”, Int. Conf. onEco-Materials (ICEM), Singapore, (2005).・ Shin Serizawa, Kazuhiko Inoue, Masatoshi Iji, “ Kenaf Fiber-ReinforcedBiomass-Plastic Used For Electronic Products”, Int. Symp. on EnvironmentallyConscious Design & Inverse Manufacturing (EcoDesign) , Japan, 120-121(2005).・ Yukihiro Kiuchi, Masatoshi Iji, “Environmentally Friendly Flame-RetardingPlastics for Electronic Devices”, Green Sustainable Chemistry InternationalConference (GSC), Japan,(2003).・ Yukihiro Kiuchi, Masatoshi Iji, “Environmentally Conscious IC MoldingCompound without Toxic Flame-Retardants”, Int. Symp. on SemiconductorManufacturing (ISSM), USA, Proceedings,147-150 (2000)・ Yukihiro Kiuchi, Masatoshi Iji, “Self-extinguishing Epoxy Resin Compoundwithout Toxic Flame Retardants”, Int. Flame Retardant (IFR) Beijing Inst ofTechnology, Chinese, (1999).・Shunji Kishida, Masatoshi Iji, Yukihiro Kiuchi, “Self-Extinguishing Epoxy ResinCompound without Flame-Retarding Additives and Its Potential Application toIC-Molding Compounds”, Int Conf on Halogen-Free Materials for Electronic &Electrical Products Inst for Production Engineering Research (IVF), Sweden,(1999).6