10.07.2015 Views

NESLAB ULT Series Bath Circulators - Equipar.com.mx

NESLAB ULT Series Bath Circulators - Equipar.com.mx

NESLAB ULT Series Bath Circulators - Equipar.com.mx

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>NESLAB</strong> RTE <strong>Series</strong> and EX <strong>Series</strong> AccessoriesFeatureBenefit<strong>NESLAB</strong> RTE and EX <strong>Series</strong> <strong>Bath</strong> <strong>Circulators</strong>Reservoir refill systemAnti reservoir overflow deviceRemote sensorsPlumbing kitsTygonSiliconeTest tube racksStainless steel leveling device*Flow controller**Ground fault circuit controllerAttaches easily to the rear of the RTE to conserve space. Runs your equipment worry free andunattended. Automatically refills your bath from a pressured fluid source when the fluid in thebath drops below an acceptable limit due to evaporation. Specify voltage requirementsConnects to your bath circulator's drain line to prevent an accidental overflow of fluid in thereservoirAllow remote temperature control of the application. The sensors maintain the setpoint at any placein the recirculating fluid path. The sensors are platinum RTDs and are <strong>com</strong>patible with RTE<strong>Series</strong> and EX <strong>Series</strong> bath circulators when used with a Digital Plus Controller.Different diameters and lengths are availableAllows circulation between -25ºC and +100ºC and includes 25' of tygon tubing, 25' of tubinginsulation, and 4 hose clampsAllows circulation between -100ºC and +100ºC and includes 25' of silicone tubing, 25' of tubinginsulation, and 4 hose clampsOffer convenient handles for easy and safe placement or removal. Made of stainless steelfor durabilityEnsures that the fluid level in the external container remains constantQuick and easy set up for external circulation to open containerPlugs your RTE unit or EX unit in to the GFCI accessory to provide extra electrical protectionwhen a GFCI wall outlet is not available. May only be used with 115 Volt, 60 Hz unitsAllows circulation to temperatures down to -30°C in a 50/50 blend when mixed with waterRestricts growth of algae to protect equipment and instrumentationEthylene glycolChloramine-T algicideSilicone oil Designed for use in high temperature applications from 35°C to 150°C*Used with standard ring stand**Necessary to operate stainless steel leveling deviceFTC 350 — FlowThru cooler for the <strong>NESLAB</strong> EX <strong>Series</strong>can achieve temperatures as low as -10°C8 Customer Service: 1-800-258-0830 • Web Address: www.thermo.<strong>com</strong>/tc

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!