iSR6200 Intelligent Storage Router Installation Guide - QLogic

5–Fibre Channel over IPConfiguring FCIPRound-Trip TimeRTT is the time required for a packet to travel from the sender to the receiver, andthen return to the sender. The router’s ping feature, either CLI or GUI, can helpdetermine the RTT. The following is an example of the CLI ping commandexecuted on GE port 1.iSR6200 (admin) #> pingA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.IP Address (IPv4 or IPv6) [0.0.0.0] 172.35.14.250Iteration Count (0=Continuously) [0 ] 10Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] 1Size Of Packet (Min=1, Max=1472 Bytes) [56 ]Pinging 172.35.14.250 with 56 bytes of data:Reply from 172.35.14.250: bytes=64 time=284.2msReply from 172.35.14.250: bytes=64 time=284.6msReply from 172.35.14.250: bytes=64 time=283.9msReply from 172.35.14.250: bytes=64 time=284.4msReply from 172.35.14.250: bytes=64 time=283.8msReply from 172.35.14.250: bytes=64 time=284.3msReply from 172.35.14.250: bytes=64 time=284.0msReply from 172.35.14.250: bytes=64 time=284.0msReply from 172.35.14.250: bytes=64 time=283.9msReply from 172.35.14.250: bytes=64 time=284.4msPing Statistics for 172.35.14.250:Packets: Sent = 10, Received = 10, Lost = 0Approximate round trip times in milliseconds:Minimum = 283.8ms, Maximum = 284.6ms, Average = 284.1msiSR6200 (admin) #>ISR651101-00 G 5-9