iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationControlling per-Host LUN Access on the iSR6200Target Access Control (0=Enable, 1=Disable) [Disabled ]Telnet (0=Enable, 1=Disable) [Enabled ]SSH (0=Enable, 1=Disable) [Enabled ]All attribute values that have been changed will now be saved.NOTE:• You must reboot the router to change the LUN mapping status, whetheryou are enabling it or disabling it.• If you are running a dual-blade HA configuration, make sure both bladeshave the same setting.Figure 4-24 shows how to select the enable option for LUN masking on iSR6200blade 1. To apply these changes, you must click Save, type the system password,and then reboot the router blade.Figure 4-24. Enabling LUN Mask Mode4-28 ISR651101-00 G