iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationControlling per-Host LUN Access on the iSR62004. In the Security Check dialog box, type the system password (the default isconfig), and then click Next.The LUN Masking Configuration Status window lists the mapping requests,as shown in Figure 4-22.Figure 4-22. Target Presentation/LUN Mapping Wizard—LUN MaskingConfiguration Status5. Verify the completion status shown on the LUN Masking ConfigurationStatus window, and then click Finish to close the wizard.You can map additional LUNs using either SANsurfer Router Manager or the CLI.The iSCSI host cannot access mapped LUNs until it logs into the presented targetfor the corresponding iSR6200 virtual port group and Fibre Channel targetWWPN.Figure 4-23 uses color coding to identify the LUN mapping that became availableafter the host logs into the presented targets.4-26 ISR651101-00 G