iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationControlling per-Host LUN Access on the iSR62001 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2Please select a Target from the list above ('q' to quit): 0Index (LUN/VpGroup) Vendor----- ------------- ------1 1/VPGROUP_1 DGC2 2/VPGROUP_1 DGC3 3/VPGROUP_1 DGCPlease select a LUN to present to the initiator ('q' to quit): 1All attribute values that have been changed will now be saved.Figure 4-19 shows the effect of mapping an initiator to LUN 1 using the CLIcommands shown in the preceding example.iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970Storage ArrayLog-InLUN 1Host accessible LUNsiSR6200FC1Blade 1FC221:00:00:c0:dd:13:16:f821:01:00:c0:dd:13:16:f821:02:00:c0:dd:13:16:f821:00:00:c0:dd:13:16:f921:01:00:c0:dd:13:16:f921:02:00:c0:dd:13:16:f9Host EntitiesHost Entity 021:00:00:c0:dd:13:16:f821:00:00:c0:dd:13:16:f9Host Entity 121:01:00:c0:dd:13:16:f821:01:00:c0:dd:13:16:f9Host Entity 221:02:00:c0:dd:13:16:f821:02:00:c0:dd:13:16:f9LUN 1LUN 2LUN 3LUN 4LUN 5LUN 6Figure 4-19. Logging into Target After Mapping LUN 1You can accomplish the same LUN mapping using the SANsurfer RouterManager’s Target Presentation/LUN Mapping Wizard.To map LUN 1 to an initiator using SANsurfer Router Manager:1. On the Wizards menu, click Presentation Wizard.2. On the Select the Initiators for the LUN Presentation window, select aninitiator as shown in Figure 4-20, and then click Next.4-24 ISR651101-00 G