iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationConnecting iSCSI Hosts to the iSR6200To view presented target information using SANsurfer Router Manager, expandthe iSCSI Presented Targets node in the left pane, and then select the device, asshown in Figure 4-14.Figure 4-14. Selecting the iSCSI Presented Targets in SANsurfer Router ManagerEnabling additional VP Groups can create multiple IQN strings for the same FibreChannel WWPN. The following example shows two Fibre Channel target WWPNsand three VP groups, resulting in six presented iSCSI qualified names. Forinformation about how to enable and configure additional VP Groups, see“Enabling Virtual Port Groups” on page 4-2.iSR6200 (admin) #> show targetsTarget Information--------------------WWNN10:00:00:20:c2:07:59:70WWPN20:03:00:20:c2:07:59:70Port ID0a-02-00StateOnlineWWNNWWPNPort IDState10:00:00:20:c2:07:59:7021:04:00:20:c2:07:59:700a-03-00Online4-18 ISR651101-00 G