iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationConnecting iSCSI Hosts to the iSR6200The following example shows the anatomy of a sample IQN string from aniSR6200 router:iqn.2004-08.com.qlogic:iSR6200.0834e00019.b1.01.20030020c20759701. Vendor name and registration date2. Product Name3. iSR6200 Chassis Serial Number4. Blade (b1 or b2)5. VPGroup (01 through 04)6. Fibre Channel target WWPNNotice that the IQN string does not contain any information about which iSR6200physical iSCSI port to which you are connecting. iSCSI load balancing andfailover are handled by the iSCSI host and not on the iSR6200.Also notice that the IQN string does not contain any information about whichphysical Fibre Channel port on the iSR6200 through which the Fibre Channeltarget device is attached.You can view the complete list of IQN strings that your iSR6200 is presenting withthe show presented_targets command in the CLI. For example:iSR6200 (admin) #> show presented_targetsPresented Target Information------------------------------1 2 3 4 5 6iSCSI Presented Targets-------------------------Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.20030020c2075970AliasWWNN 10:00:00:20:c2:07:59:70WWPN 20:03:00:20:c2:07:59:70Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.21040020c2075970AliasWWNN 10:00:00:20:c2:07:59:70WWPN 21:04:00:20:c2:07:59:70ISR651101-00 G 4-17