iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationZoning Virtual Port Groups on the SANZoning Virtual Port Groups on the SANWhen zoning the iSR6200 virtual port group WWPNs to a Fibre Channel array,you must ensure all WWPNs of a virtual port group are zoned to any single FibreChannel target WWPN. Figure 4-5 shows the proper zoning for a single bladeiSR6200 with three VP groups enabled using a single Fibre Channel switch.Zone 6200 FC_One21:00:00:c0:dd:13:16:f821:01:00:c0:dd:13:16:f821:02:00:c0:dd:13:16:f8A1B0Zone 6200 FC_Two21:00:00:c0:dd:13:16:f921:01:00:c0:dd:13:16:f921:02:00:c0:dd:13:16:f9A0B1SAN AiSR6200FC1Blade 1FC221:00:00:c0:dd:13:16:f821:01:00:c0:dd:13:16:f821:02:00:c0:dd:13:16:f821:00:00:c0:dd:13:16:f921:01:00:c0:dd:13:16:f921:02:00:c0:dd:13:16:f9FC Target ArrayController AFC1 A0FC2 A1Controller BFC1B0FC2B1Figure 4-5. Single Blade, Single Fibre Channel SwitchISR651101-00 G 4-9