iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationEnabling Virtual Port GroupsIndex 2VpGroup NameVPGROUP_2StatusEnabledWWPNs21:01:00:c0:dd:13:16:f821:01:00:c0:dd:13:16:f9Index 3VpGroup NameVPGROUP_3StatusEnabledWWPNs21:02:00:c0:dd:13:16:f821:02:00:c0:dd:13:16:f9Index 4VpGroup NameVPGROUP_4StatusDisabledWWPNsN/AIn the preceding examples, the second byte from the left (in bold text) denotes thevirtual port group ID, and the right-most byte (in italic text) denotes the physicalFibre Channel port. In these examples VPGs 1 through 3 have correspondingvirtual ports with 00, 01, and 02 presented out of physical FC ports 0 and 1, withWWPNs ending in f8 and f9, respectively.The following example shows the information grouped by physical Fibre Channelport.iSR6200 (admin) #> show fcFC Port Information---------------------FC Port 1Port StatusEnabledLink StatusUpCurrent Link Rate4GbProgrammed Link RateAutoWWNN20:00:00:c0:dd:13:16:f8 (VPGROUP_1)WWPN21:00:00:c0:dd:13:16:f8 (VPGROUP_1)Port ID0a-04-00 (VPGROUP_1)WWNN20:01:00:c0:dd:13:16:f8 (VPGROUP_2)WWPN21:01:00:c0:dd:13:16:f8 (VPGROUP_2)Port ID0a-04-01 (VPGROUP_2)WWNN20:02:00:c0:dd:13:16:f8 (VPGROUP_3)WWPN21:02:00:c0:dd:13:16:f8 (VPGROUP_3)4-6 ISR651101-00 G