iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationEnabling Virtual Port GroupsFigure 4-2. Chassis Information for Selected VPGROUP3. Click Save.4. In the System Check dialog box, type the system password, and then clickOK.The Set VPGroup message box opens, as shown in Figure 4-3.Figure 4-3. Set VPGroup Message Box5. Click OK to close the message box.To enable or disable a VPGroup using the CLI:The following example shows how to enable VPGroups 2 and 3 by issuing the CLIset vpgroups command.iSR6200 (admin) #> set vpgroupsThe following wizard will query for attributes before persistingand activating the updated mapping in the system configuration.4-4 ISR651101-00 G