iSR6200 Intelligent Storage Router Installation Guide - QLogic

4–ConfigurationEnabling Virtual Port GroupsUsing SANsurfer Router Manager, select one of the VP Group nodes in the leftpane to view that VP Group’s information in the right pane, as shown inFigure 4-1.Figure 4-1. SANsurfer Router Manager VPGroupYou can enable or disable virtual port groups on your blade using eitherSANsurfer Router Manager or the CLI.To enable or disable a VPGroup using SANsurfer Router Manager:1. In the system tree pane on the left, click the VP Group.The right panel shows information about the selected VP Group.2. In the Status list, select Enabled or Disabled (see Figure 4-2).ISR651101-00 G 4-3