iSR6200 Intelligent Storage Router Installation Guide - QLogic

3–InstallationInstalling the iSR6200 RouterConfiguring the Workstation Serial PortTo configure the workstation serial port:1. Connect the cable with an RJ45 to DB9F adapter from a COM port on themanagement workstation to the serial port on the router.2. Configure the workstation serial port according to your platform. These stepsmay vary according to the operating system version you use:For Windows:a. Open the HyperTerminal application: On the Windows Startmenu, click Programs, point to Accessories, point toCommunications, and then click HyperTerminal.b. Enter a name for the router connection, choose an icon in theConnection Description window, and then click OK.c. In the COM Properties window, type the following COM Portsettings, and then click OK.Bits per second—115200Data Bits—8Parity—NoneStop Bits—1Flow Control—NoneFor Linux:a. Set up minicom to use the serial port. Create or modify the/etc/minirc.dfl file with the following content:pr portdev/ttyS0pu minitpu mresetpu mhangupWhere pr portdev/ttyS0 specifies port 0 on theworkstation. Select the pr setting to match the workstation portto which you connected the router.b. Verify that all users have permission to run minicom. Review the/etc/minicom.users file and confirm that the line ALL existsor that there are specific user entries.For Solaris:• Modify the /etc/remote file to include the following line:\:dv=/dev/term/a:br#115200:el=^C^S^Q^U^D:ie=%$:oe=^D:3-10 ISR651101-00 G