iSR6200 Intelligent Storage Router Installation Guide - QLogic

1–IntroductioniSR6200 Router BladesiSR6200 SystemGE4 GE3 iSR624010GbE210GbE1 iSR6250Intelligent Storage RouterIntelligent Storage RouterActivityMGMT IOIOI FC1 FC2 GE1 GE1Link StatusFigure 1-12. Ethernet Management PortSerial PortA management workstation can be a Windows ® , Solaris ® , or a Linux ® workstationthat configures and manages the router. You can manage the router over anEthernet connection using either SANsurfer Router Manager, the CLI, or SNMP.The management Ethernet port has two LEDs:• The link status LED (green) lights up continuously when the port establishesan Ethernet connection.• The activity LED (green) lights up when the port transmits or receives dataover the Ethernet connection.The iSR6200 router is equipped with an RS-232 serial port for maintenancepurposes. Figure 1-13 shows the serial port location, which is labeled IOIOI. Youcan manage the router through the serial port using the CLI.iSR6200 SystemGE4 GE3 iSR624010GbE210GbE1 iSR6250Intelligent Storage RouterIntelligent Storage RouterMGMT IOIOI FC1 FC2 GE1 GE1Serial PortFigure 1-13. Serial PortThe serial port connection requires a standard eight-wire Ethernet cable and thesupplied dongle to convert the Ethernet RJ45 connector to a female DB9connector.ISR651101-00 G 1-13