iSR6200 Intelligent Storage Router Installation Guide - QLogic

1–IntroductioniSR6200 Router Blades• iSCSI header and data digest in the hardware• IPv4 and IPv6 protocol support• iSCSI offloadFigure 1-7. iSCSI (GE) Ports on the iSR6240 Router BladeRouter Blade LEDsActivityLink StatusEach chassis blade provides LEDs and connectors that face the front of thechassis and may also provide expansion ports, depending on its model. Therouter blade LEDs shown in Figure 1-8 provide information about the router’soperational status. These LEDs include the heartbeat LED, the system fault LED,and the input power LED. The blade also includes a recessed beacon indicatorused to locate the physical blade monitored using SANsurfer Router Manager.iSR6200 SystemGE4 GE3 iSR624010GbE210GbE1 iSR6250Intelligent Storage RouterIntelligent Storage RouterMGMT IOIOI FC1 FC2 GE1 GE1Heartbeat LED System Fault LED Power LEDBeacon IndicatorFigure 1-8. Router Blade LEDsHeartbeat LED (Green)The heartbeat LED blinks once per second as long the router firmware isoperational.System Fault LED (Amber)The system fault LED lights up to show that a fault exists in the router firmware orhardware. Fault conditions include power on self-test (POST) errors andover-temperature conditions. The LED shows a blink code for POST errors andthe over-temperature condition. See Figure 1-8 and Table 1-3.ISR651101-00 G 1-7