iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription172238 FcipRoute#%d: Synchronization Error onReceive172239 FcipRoute#%d: Decompression Error onReceive172240 FcipRoute#%d: De-encapsulation Error onReceiveFCIP Error Indicates an error in the received FCIP PDU framing;router will disconnect and reconnect with remoterouter to clear the error.FCIP Error Indicates the receiver could not decompress areceived FCIP frame. The router will disconnect andreconnect with the remote router to clear the error.FCIP Error Invalid FCIP header received. The header is invalidor improperly framed. The router will disconnect andreconnect with the remote router to clear the error.172245 FcipRoute#%d: Transmit Failure FCIP Error FCIP PDU transmit request was rejected, typicallycaused by the TCP connection closing when sendwas submitted. Can also be caused by lack ofresources to accommodate the send (should neverhappen). If this persists and the TCP connection is upa reboot is required to clear the condition.172246 FcipRoute#%d: Remote Peer Disconnected FCIP Error The remote peer terminated the TCP connection viaa FIN (finished) or RST (reset) flag. The router willattempt to restore the TCP connection.172247 FcipRoute#%d: Failed to send FC Up/Down FCIP Error Unable to notify the remote router that the local FibreChannel link came up or went down. The TCP connectionwill be closed and the router will attempt toreconnect to the remote router.172249 FcipRoute#%d: FCIP Link Down FCIP Error The Fibre Channel link went down. Check the FibreChannel cabling and Fibre Channel switch or drivestatistics.C-32 ISR651101-00 G