iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription151913 qapimaptargetdevice_1_svc: Target WWPN:%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x unmappedfrom iSCSI portal %d.152082 qapiaddmodifyinitiator_1_svc : InitiatorConfiguration Changed152083 qapiremoveinitiator_1_svc : InitiatorRemoved152096 qapisetmigrfctargets_1_svc: ConfigurationChanged for migration targetUser Info The target at WWPN: xx.xx.xx.xx.xx.xx.xx.xx hasbeen unmapped from iSCSI portal %dUser Info An initiator’s configuration has changed.User Info An initiator has been removed.User Info A set array was done on one of the arrays.152099 LogMigration: Error in Writting log file User Info Encountered an error while updating the migrationlog entry. Some migration log entries might be missing.152100 qapiaddgroup_1_svc: Added Group with id %d User Info Group with ID specified in the log was added.152101 qapiremovegroup_1_svc: Removed Group withid %d152102 qapiupdategroup_1_svc: Updated Group withid %dUser Info Group with ID specified in the log was removed.User Info Group with ID specified in the log was updated.152103 qapisetserialjobs_1_svc: Serial Time %lu User Info Serial schedule jobs scheduled to start at time specifiedin the log.152104 qapireadjustpriority_1_svc: ReadjustPriority Failed on line %d with error %dUser Info Readjust priority command completed with an error.Error code 2 indicates no scheduled jobs were found.Error code 16 indicates a job with priority 1 configured.ISR651101-00 G C-29