iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription139305 QBRPC_Initialize:LunList MemAlloc error User Error Failed memory allocation for LUN List API.139315 QBRPC_FreeResources:Entered User Error RPC free resources entry point.139553 checkDuplicateIp: DetectedError %08x %08x%04x139930 FcipRoute#%d Failed with MemoryAllocation ErrorUser Error Detected duplicate IP address for management port.User Error Memory resources could not be allocated to an FCIProute. The route was not created. The router must berebooted to clear this error.139931 FcipRoute#%d Failed with Invalid Arg Error User Error Invalid argument specified by user. The precedingmessage in the log indicates which parameter is inerror.139932 FcipRoute#%d Failed with Unknown DeviceErrorUser Error Specified route or port (Fibre Channel or Ethernet)does not exist. Verify that the value entered is a validvalue.139933 FcipRoute#%d Failed with Kernel Error User Error Invalid memory address was encountered whilereading/writing or modifying FCIP route definition.Reboot the router.139934 FcipRoute#%d Failed with NetworkConfiguration Error139935 FcipRoute#%d Failed with Persistence ReadFailureUser Error Network device configuration failed; could not add orremove a network device instance. Verify the IPaddresses, mask, gateway, and Ethernet port specifiedin the route definitionUser Error Read of FCIP Route definition from persistent memoryfailed. Reboot the routerC-26 ISR651101-00 G