iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription119089 #%d: QLIsrEventHandler: LIP resetoccurred (%x): mailbox1 = %x119090 #%d: QLIsrEventHandler: Link up (%x)mailbox1 = %x119092 #%d: QLIsrEventHandler: Link mode up (%x):RunTimeMode=%x119093 #%d: QLIsrEventHandler: RSCN update (%x)rscnInfo: %x119097 #%d: QLIsrEventHandler: Port update (%x)mb1-3 %x %x %x119144 #%d: QLTimer: VP %d discover a rejectdevice PID %02x%02x%02x120278 #%d: QLFlashGetNvram: Invalid Serial LinkControl 0x%x for port %d120373 #%d: QLIsrEventHandler: DCBX Completed(%x)120374 #%d: QLIsrEventHandler: IDC Completion(%x) %x, %x, %x, %x, %x, %x, %xFC Info Fibre Channel LIP reset occurred. The LIP reset typeis reported, as is the contents of the Fibre Channelprocessor’s mailbox 1 register.FC Info Fibre Channel link up occurred. Event status isreported, as is the contents of the Fibre Channel processor’smailbox 1 register.FC Info Fibre Channel link up occurred. Event status isreported, as is the RunTimeMode (0 = loop, 1 =point-to-point).FC Info An RSCN was received. Event status is reported, asis the RSCN information.FC Info Fibre Channel port update. Event status is reported,as is the contents of the Fibre Channel processor’smailbox 1, 2, and 3 registers.FC Info A virtual port logged into a device, but the devicerejects the login.FC Info Update NVRAM for the invalid Serial Link Control formezzanine platform.FC Info For FCoE protocol, the data center bridgingexchange (DCBX) protocol completes.FC Info For FCoE protocol, the inter-driver communications(IDC) completes.C-22 ISR651101-00 G