iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription106851 #%d: QLTimer: Heartbeat failed FC Error The Fibre Channel controller failed to provide aheartbeat.106853 #%d: QLTimer: Link error count (0x%x)exceeded, link downFC Error The driver has determined that the Fibre Channel linkis unreliable and unusable due to the number oferrors encountered. The link has been taken down.106912 #%d: QLReserveLoopId: out of loop Ids FC Error The Fibre Channel processor was unable to obtainthe number of loop IDs required. This failure occursonly when the Fibre Channel processor is runningmulti-ID firmware.106928 #%d: QLMarkDeviceOffline: Device Id: %xmarked offline, cLinkDownTimeout = %x,cPortDownRetryCount=%x106948 #%d: QLSnsGetAllNext: Name server loginFAILED %x107029 #%d: QLUpdateDeviceData: out of slots inhost database107030 #%d: QLUpdateDeviceData: out of slots intarget database107041 #%d: QLUpdateDeviceDatabase 0x%x: GET_IDfailed %x107056 #%d: QLUpdateDeviceDatabase 0x%x: out ofslots in host databaseFC Error The driver was unable to re-establish connection tothe target within the timeout and retry counts, and istherefore marking it offline.FC Error The Fibre Channel processor is unable to log into theFibre Channel fabric name server.FC Error The driver’s host (initiator) database is full.FC Error The driver’s target database is full.FC Error The driver’s host (initiator) database is full. Maximumhost database is 64.FC Error The drivers host (initiator) database is full.C-20 ISR651101-00 G