iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription102755 #%d: QLTimer: Heartbeat failed FC Fatal Fibre Channel processor heartbeat failed.102800 #%d: QLRestartRisc: restart RISC FC Fatal Fibre Channel processor being restarted.106583 #%d: QLUtmReceiveIo: Path invalid/FW Noresource count %xFC Error The Fibre Channel processor received a SCSI commandfor an unknown target path or has run out ofresources to execute additional commands.106589 #%d: QLIoctlEnable: Adapter disabled FC Error The Fibre Channel processor was disabled by anIOCTL request to the driver.106590 #%d: QLIoctlEnable: Initialize FW error FC Error The Fibre Channel processor firmware failed initialization.The request to initialize was received by thedriver in an IOCTL request.106592 #%d: QLIoctlRunDiag: Diagnostic loopbackcommand failed %x% %x %x106593 #%d: QLIoctlDisable: Re-initializeadapter failedFC Error The Fibre Channel processor failed the external loopbacktest.FC Error The Fibre Channel processor failed to re-initialize inresponse to an IOCTL disable request.106803 #%d: QLIsrEventHandler: Link down (%x) FC Error The Fibre Channel processor reported a link downcondition.106813 #%d: QLIsrEventHandler: Unexpected asyncevent (%x), MB1=%x, MB2=%x, MB3=%x,MB4=%x, MB5=%x, MB6=%x, MB7=%x106847 #%d: QLProcessResponseQueue: InvalidEntryStatus %x, type %xFC Error The Fibre Channel processor reported an unexpectedasynchronous event. The mailbox registersprovide status, event code, and data related to theevent.FC Error The Fibre Channel controller reported an invalidEntry Status %x, type %x.ISR651101-00 G C-19