10.07.2015 Views

iSR6200 Intelligent Storage Router Installation Guide - QLogic

iSR6200 Intelligent Storage Router Installation Guide - QLogic

iSR6200 Intelligent Storage Router Installation Guide - QLogic

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

C–Log MessagesTable C-1. <strong>iSR6200</strong> <strong>Router</strong> Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription86347 #%d: QLDisable: Restart RISC iSCSI Info Restart iSCSI processor (RISC).86349 #%d: QLEnable: Restart RISC to updateEEPROMiSCSI Info EEPROM updated, restart iSCSI processor (RISC).86874 #%d: QLIsrDecodeMailbox: Link up iSCSI Info Link up reported by iSCSI processor for GE1 or GE2.87346 #%d: QLGetFwStateCallback: link 100Mb FDX iSCSI Info The iSCSI controller reported a link speed or configurationof 100Mb full-duplex (FDX).87348 #%d: QLGetFwStateCallback: link 1000MbFDX87350 #%d: QLGetFwStateCallback: Invalid linkspeed 0x%x102419 #%d: qlutm_init: Diagnostic failed, port 1invalid SRAM102420 #%d: qlutm_init: Diagnostic failed, port 1POST failed102421 #%d: qlutm_init: Diagnostic failed, port 2invalid SRAM102422 #%d: qlutm_init: Diagnostic failed, port 2POST failed102423 #%d: qlutm_init: Failed to returndiagnostic result to Bridge102656 #%d: QLInitializeAdapter: Reset ISPfailediSCSI Info The iSCSI controller reported a link speed/configurationof 1000Mb FDX.iSCSI Info The iSCSI controller reported an invalid link speed.FC Fatal FC1 processor SRAM test failed.FC Fatal FC1 processor power-on self-test (POST) failed.FC Fatal FC2 processor SRAM test failed.FC Fatal FC2 processor POST failed.FC Fatal Fibre Channel processor failed to return diagnosticresults.FC Fatal Fibre Channel processor failed reset.ISR651101-00 G C-17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!