iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription74659 #%d: QLReadyTimer: Adapter missedheartbeat for 0x%x seconds74660 #%d: QLReadyTimer: Abort pTpb=%p failed,DrvCount 0x%x74661 #%d: QLTimer: Abort pTpb=%p, Type %x,Timeout 0x%x DrvCount 0x%x, DdbIndex 0x%x74663 #%d: QLReadyTimer:MBOX_CMD %04x %04x %04x %04x%04x %04x %04x %04x timed outiSCSI Error The iSCSI processor (adapter) failed to provide aheartbeat for x seconds.iSCSI Error The iSCSI processor failed to complete an abortrequest.iSCSI Error The driver timed out an iSCSI processor operationand is aborting the operation.iSCSI Error The driver timed out an iSCSI processor mailboxcommand.74665 #%d: QLReadyTimer: QLiSNSReenable failed. iSCSI Error The driver timed out while attempting to reconnectwith the iSNS.74705 #%d: QLProcessSystemError: Restart RISC iSCSI Error The iSCSI processor was restarted.74746 #%d: QLInitializeFW:MBOX_CMD_INITIALIZE_FIRMWARE failed %04x%04x %04x %04x %04x %04x74784 #%d: QLUpdateInitiatorData: No more roomin Initiator Database.74800 #%d: QLSetTargetData: No more room inTarget Database.75008 #%d: ql_process_error: OB_TCP_IOCB_RSP_Wreturned DdbInx 0x%x pTpb %piSCSI Error The iSCSI processor rejected the firmware initializecommand.iSCSI Error The driver’s initiator database is full. The driver iscapable of storing 1024 iSCSI initiators in its database.Use the CLI or GUI to remove unwanted orunused iSCSI initiators.iSCSI Error The driver’s target database is full. Use the CLI orGUI to remove unwanted or unused iSCSI targets.iSCSI Error A TCP retry for a frame failed on the connectionddbIndex. Tpb contains the frame memory address.C-16 ISR651101-00 G