iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription41717 QLBI_Passthru: Invalid data length %dbytes41750 QLBI_Ioctl: ERROR: Operation (0x%x) notsupported in this mode41768 QLBI_GetLunList: REPORT LUNS commandfailed41769 QLBI_GetLunList: REPORT LUNS commandfailed with CHECK CONDITION, SCSI STATUS0x%02X41771 QLBI_GetLunList: Lun allocation failedfor LunId %dApp Error Pass-Through command issued by managementapplication (such as GUI) was interrupted or timedout.App Error IOCTL operation unsupported. Operation code providedin log message.App Error Report LUNs command failed. The Report LUNscommand was issued by the router as part of its discoveryprocess.App Error Report LUNs command failed with check conditionstatus. The Report LUNs command was issued bythe router as part of its discovery process.App Error Failed to allocate LUN object; out of resources.41994 QLFC_Login: VpIndex (%d) out of range App Error Login attempted using Fibre Channel virtual port (VP)index that is out-of-range (range = 0–31). Indexreported in log message.41995 QLFC_Login: VP Index 0x%x not configured App Error Login attempted using Fibre Channel VP index thathas not been configured. Operation attempted on anunconfigured VP.42002 QLFC_Login: Can't open connection App Error Attempting login but Fibre Channel connection cannotbe opened.42024 QLFC_Logout: No active path to device.WWPN:%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2XApp Error Attempting logout of device for which there is noactive path (WWPN not found).C-6 ISR651101-00 G