iSR6200 Intelligent Storage Router Installation Guide - QLogic

C–Log MessagesTable C-1. iSR6200 Router Log Messages (Continued)IDLog MessageModuleTypeMsg.TypeDescription41077 QLBA_CreateInitiatorObject: Too manyinitiators41096 QLBA_DisplayTargetOperationStatus: PCIError, Status 0x%.2x41106 QLBA_DisplayInitiatorOperationStatus: DMAError, Status 0x%.2x41107 QLBA_DisplayInitiatorOperationStatus:Transport Error, Status 0x%.2x41111 QLBA_DisplayInitiatorOperationStatus:Data Overrun, Status 0x%.2x41234 QLIS_LoginPduContinue: Operation failed.Initiator 0x%x, TPB status 0x%x41238 QLKV_ValidateLoginTransitCsgNsgVersionfailed (status 0x%x)41257 QLIS_LoginPduContinue: Invalid initiatorname. Initiator:41265 QLIS_LoginPduContinue: Target notconfigured for Portal41267 QLIS_LoginPduContinue: Target not found.Target name:App Error Unable to create an object for initiator object;exceeded the maximum number of initiators.App Error Process control block status indicates that a peripheralcomponent interconnect (PCI) error occurredduring a target operation.App Error Process control block status indicates that a directmemory access (DMA) error occurred during an initiatoroperation.App Error Process control block status indicates that a transporterror (protocol) occurred during an initiator operation.App Error Process control block status indicates that a dataoverrun error occurred during an initiator operation.App Error iSCSI login failed between receipt of protocol dataunit (PDU) and request for the data segment.App Error iSCSI login failed due to unsupported version numberin received login PDU.App Error iSCSI Login PDU contains invalid initiator name. Theformat and character set used to form the initiatorname is invalid.App Error iSCSI target login was attempted to a portal (iSCSI1or iSCSI2) on which the target is not presented.App Error iSCSI Login PDU received for a target with a targetname unknown to the router.ISR651101-00 G C-3